| 1 |
Rohner D, Guijarro-Martinez R, Bucher P, et al. Importance of patientspecific intraoperative guides in complex maxillofacial reconstruction [J]. J Craniomaxillofac Surg, 2013, 41(5): 382-390.
|
| 2 |
罗文峰, 杨雪香, 敖宁建. 生物医用材料的3D打印技术与发展 [J]. 材料导报, 2016, 30(7): 80-86.
|
| 3 |
裴延军, 吴智钢. 世界首例3D打印金属锁骨和肩胛骨植入手术在西京医院成功实施 [J]. 生物骨科材料与临床研究, 2014, 11(3): 34.
|
| 4 |
姚洁, 蔡礼钊, 刘湘宁, 等. 3D生物打印在口腔颌面部的应用前景 [J]. 分子影像学杂志, 2018, 41(3): 302-305.
|
| 5 |
廖俊琳, 王少华, 陈佳, 等. 3D生物打印在组织工程软骨再生与重建应用中的研究进展 [J].中南大学学报(医学版), 2017, 42(2): 221-224.
|
| 6 |
Megías Barrera J, García-Consuegra L, Novoa A, et al. Histological and radiological evaluation of subcutaneous implants in mouse of a 3D-Printable material (Fulcure 720) and experimental application in mandibular reconstruction [J]. J Stomatol Oral Maxillofac Surg, 2018, 119(2): 88-92.
|
| 7 |
Stansbury JW, Idacavage MJ. 3D printing with polymers: Challenges among expanding options and opportunities [J]. Dental Materials, 2016, 32(1): 54-64.
|
| 8 |
Tahayeri A, Morgan M, Fugolin AP, et al. 3D printed versus conventionally cured provisional crown and bridge dental materials [J]. Dental Materials, 2018, 34(2): 192-200.
|
| 9 |
陈旭卓, 周知航, 郑吉驷, 等. 3D生物打印技术在口腔颌面部骨组织缺损修复的研究进展 [J]. 中国口腔颌面外科杂志, 2018, 16(3): 279-283.
|
| 10 |
钟恩意, 刘瑞源, 高杰, 等. 3D生物打印技术及其在牙周骨缺损修复中的应用 [J]. 中国医学物理学杂志, 2016, 33(1): 49-53.
|
| 11 |
司云强, 李宗安, 朱莉娅, 等. 生物陶瓷3D打印技术研究进展 [J]. 南京师范大学学报, 2017, 17(1): 1-11.
|
| 12 |
赵玫, 吴海珍, 王鑫, 等. 牙源性双相陶瓷的研制及其骨缺损修复实验 [J]. 安徽医科大学学报, 2013, 48(6): 617-620.
|
| 13 |
Maggie MH, Timothy MC, Ahmed IM, et al. Massive facial teratoma managed with the ex utero intrapartum treatment (EXIT) procedure and use of a 3-dimensional printed model for planning of staged debulking [J]. Journal of Pediatric Surgery Case Reports, 2017, 17: 15-19.
|
| 14 |
Sayed Aluwee SAZB, Zhou X, Kato H, et al. Evaluation of pre-surgical models for uterine surgery by use of three-dimensional printing and mold casting [J]. Radiol Phys Technol, 2017, 10(3): 279-285.
|
| 15 |
Ajao MO, Clark NV, Kelil T, et al. Case Report: Three-Dimensional Printed Model for Deep Infiltrating Endometriosis [J]. J Minim Invasive Gynecol, 2017, 24(7): 1239-1242.
|
| 16 |
何泓, 林琳, 陈娟娟, 等. 3D打印模型在复杂型胎盘植入患者子宫切除术中的应用价值 [J]. 中国实用妇科与产科杂志, 2014, 30(5): 366-368.
|
| 17 |
Laronda MM, Rutz AL, Xiao S, et al. A bioprosthetic ovary created using 3D printed microporous scaffolds restores ovarian function in sterilized mice [J]. Nat Commun, 2017, 8(1): 52-61.
|
| 18 |
Mercurio MR. The EXTEND system for extrauterine support of extremely premature neonates: opportunity and caution [J]. Pediatr Res, 84(6): 795-796.
|
| 19 |
程祎, 李杰, 叶朝阳. 3D打印在包皮环套术中的应用 [J]. 中国现代药物应用, 2018, 12(7): 25-27.
|
| 20 |
张丽, 刘青, 王春仁. 3D打印在心血管疾病中的应用 [J]. 中国医疗器械信息, 2016, 3(4): 16-21.
|
| 21 |
Biglino G, Verschueren P, Zegels R, et al. Rapid prototyping compliant arterial phantoms for in-vitro studies and device testing [J]. J Cardiovasc Magn Reson, 2013, 15: 2.
|
| 22 |
Zhao X, Liu L, Wang J, et al. In vitro vascularization of a combined system based on a 3D printing technique [J]. Tissue Eng Regen Med, 2016, 10(10): 833-842.
|
| 23 |
Huang TQ, Qu X, Liu J, et al. 3D printing of biomimetic microstructures for cancer cell migration [J]. Biomed Microdevices, 2014, 16(1): 127-132.
|
| 24 |
Lee SJ, Heo DN, Park JS, et al. Characterization and preparation of bio-tubular scaffolds for fabricating artificial vascular grafts by combining electrospinning and a 3D printing system [J]. Phys Chem Chem Phys, 2015, 17(5): 2996-2999.
|
| 25 |
孙柏林. 试析"3D打印技术"的优点与局限 [J]. 自动化技术与应用, 2013, 32(6): 1-6.
|